is backwards we are going to be putting the wire through the backside of the box so that the threads to that connector are going to be towards you as you are looking. In this clip, we are going to be removing the access panels and making electrical connections. Instead of having two separate ones we just have one and it has two screws, one on each corner. We are going to remove the screw and that will give us access to the wire. Allow the dishwasher to fill with water and start washing, then press the cancel button and let it complete the drain cycle. Step 8 - Connect Wires, now you can begin matching the colors of the wires together. (1) Electrically Operated Kitchen Waste Disposers. Leave about 6 feet of cable sticking through the hole by the dishwasher. The water line needs a 3/4-inch hole located in a convenient location for accessing the sink's hot water supply pipe.
A new dishwasher in 10 easy steps.
Luckily, the electrical connection is fairl y straightforward; just make sure to clamp the wires - be they metal-sheathed.
When deciding which connection method to use for a new installation, remember that a plug is easy to find and disconnect if the dishwasher malfunctions. Have an electrician install dryer power cord hookup a new circuit breaker in the service panel and make the final wiring connections. Now it is usually indicated by a green screw and we will take a screwdriver and we will make sure that the green screw is unscrewed enough to allow for the wire to go onto. Installation 422.16 Flexible Cords. Feed 6 inches of cable through the clamp and tighten the clamp onto the cable. Remove the covering of the NM cable with your wire stripper to expose the black, white, and green wires inside. Next, turn on the circuit breaker feeding the dishwasher and start a dishwasher cycle.
Austin hookup sites
Most legit hookup site
Top 10 hookup dating sites
Calgary hookup sites